Roll your own Mobile Paper Blogging Module!

Hi there UB3: The DEN!

In a previous post, we mentioned devising a Mobile Paper Blogging Module to assist us in this challenge. There are many ways you can go about creating a one of your very own. This is how we did it:

First:


If desired, please consult this handy .PDF Module layout template when making your own Mobile Paper Blogging Module.

Step One (1): Collect the proper materials



For this module we used:
1 Sharpie Marker, bold
1 Sheet poster board (we used Ghostline, because they came pre-cut at 11"x14")
3 Pads post-its, 3"x3"
Rubber Cement

NOTE: Though it is pictured above, we did not use school glue.

Step two (2): Lay out module elements



Identify the key elements of your desired module, and lay them out on the posterboard.

Step three (3): Add copy



It helps to work out the appropriate text over multiple rough drafts, trust us.

Step Four (4): Attach Post-Its



Apply rubber cement to the back of the the Post-It pads and to the front of poster board in the desired location. Place pads on poster board and press firmly.

Step Five (5): Admire your handy work



Voila! It is complete! Now to find the perfect location to post it...

It's that easy!

♥ TEAM G-RAD